Dropped probe in to the venting of the unit. Ran unit and observed temperatures. Found an average low temperature of 116.5 degrees and an average high temperature or 151 degree. Checked temperatures of the exhaust tube and found unit has a restriction in the wall going up to the roof. Advised customer to have vent cleaned.

Diagnosed unit and found one spring had come undone during shipping. Reset spring and tested unit. Unit no longer walking away during spin cycle.

Replaced faulty door switch and ecu. Ran unit through diagnostics mode to make sure all components within spec. Ran unit through quick cycles to ensure unit working properly. Unit working as designed.

Replaced cold control. Test ok

"Replaced control module and operations unit. Tested unit, working as designed."