Installing new compressor and dryer, pressurized to 130psi, held, bubble tested, passed, vacuumed to 500 microns, held, charged with R600a, evaporator got frost right away. Unit working to spec."

Description; door fell off. Bottom hinge was very loose, readjusted hinges, reinstalled door, tested, working to spec.

Description; unit turns off on its own and turns back on randomly. The door switch is making bad contact and display turns off and comes back on but buttons are not responsive at times. Ordering both parts and rescheduling. ; ordrng 1 11045025 (Control) and 1 10024572 (Door switch)

"Description; randomly got hot one time, waked water. Found the Unit is connected to a power cord in garage, checked temps in frzr and FF compartment, both sides are at recommend temps 0* in frzr and 37* in FF. Compressor and CFM working to spec."

"Description; unit not latching. Door latch was jammed due to unit not installed right and was forced to pull out unsuccessfully. I opened the jammed door switch made it operable again, made unit start working again without a problem but door keeps jamming due to uni being stuck deep under the counter. Advised customer to have unit installed properly for door to close right and operate right. Left door open so door switch wouldnt jam again until they have the unit installed right. Unit working to spec. Collected $110 SC, cash."