Installed new control board and tested unit. Unit now heating water during cycle. All components working to spec.

"Diagnosed unit and found igniter not properly plugged in and service switch partially tripped. Reset service switch and properly plugged in the igniter. Tested unit, unit working as designed."

2 HOURS Needs parts listed ; ordrng 1 WPW10583356 (Control) and 1 WPW10391443 (Pump) and 1 WP8183270 (Latch)

"Replaced drain pump assembly, main board, and water level pressure sensor. Ran unit through diagnostics mode and door latch would not unlock. All other components working.; ordrng 1 DC34-00028A (Door lock switch.)"

3 HOURS Needs parts listed ; ordrng 1 W10752187 (Screw(bolt)) and 1 W10902814 (Washplate) and 1 W10811960 (Basket) and 1 W10909670 (Spanner nut) and 1 W10512164 (Tub) and 1 W11032711 (Washer) and 1 W11393685 (Gearcase) and 1 W10734521 (Slider) and 1 W11027980 (Screw) and 1 W10754448 (Clutch) and 1 W10915703 (Pump) and 1 W10876600 (Pump)