Replaced damaged lid switch and worn out suspension. Tested unit, unit working as designed

Evacuated system, remove faulty compressor and condenser. Installed new compressor, condenser, filter drier, and overload. Pressurized system to 130 psi of nitrogen and let sit for 20 minutes while looking for leaks. No leaks present, unit held pressure. Vacuumed down system and charged unit. Allowed unit to run with gauges hooked up to observe pressures in system. Dropped probe in unit to observe internal temperatures. Unit pressure stabilized at 4.7/112.5psi. Internal temperature 38.6 and dropping.

found weak compressor. No frost pattern, no heat transfer in lines, and compressor cold to the touch. Evacuated system, replaced faulty compressor, filter dryer, pressurized system to 125 psi of nitrogen for 20 minutes. Allowed unit to sit with pressure while checking for leaks in lines. No leaks present. Vacuumed down system and allowed to sit. Charged system and allowed to run with gauges hooked up and probes in unit to observe pressures and internal temperatures of the unit. Pressure stabilized at 1.8/108.8. Temperatures in unti beginning to drop. Freezer cavity down to 39.9 degrees and dropping.

Removed old cooks top and installed new one. Tested unit, unit working as designed. No leaks in the lines.

Replaced faulty control board and lock. Tested unit in quick wash cycle. Unit working as designed. Door locking properly.